diff options
Diffstat (limited to 'scripting/include/cURL_header.inc')
| -rw-r--r-- | scripting/include/cURL_header.inc | 1206 |
1 files changed, 0 insertions, 1206 deletions
diff --git a/scripting/include/cURL_header.inc b/scripting/include/cURL_header.inc deleted file mode 100644 index cf51cf1..0000000 --- a/scripting/include/cURL_header.inc +++ /dev/null @@ -1,1206 +0,0 @@ -#if defined _cURL_header_included - #endinput -#endif -#define _cURL_header_included - - -/* SourceMod */ -#define LONG CURLOPTTYPE_LONG -#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT -#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT -#define OFF_T CURLOPTTYPE_OFF_T - - -#define CURL_MAX_WRITE_SIZE 16384 - -#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ -#define CURL_VERSION_KERBEROS4 (1<<1) /* kerberos auth is supported */ -#define CURL_VERSION_SSL (1<<2) /* SSL options are present */ -#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ -#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ -#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth support */ -#define CURL_VERSION_DEBUG (1<<6) /* built with debug capabilities */ -#define CURL_VERSION_ASYNCHDNS (1<<7) /* asynchronous dns resolves */ -#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth */ -#define CURL_VERSION_LARGEFILE (1<<9) /* supports files bigger than 2GB */ -#define CURL_VERSION_IDN (1<<10) /* International Domain Names support */ -#define CURL_VERSION_SSPI (1<<11) /* SSPI is supported */ -#define CURL_VERSION_CONV (1<<12) /* character conversions supported */ -#define CURL_VERSION_CURLDEBUG (1<<13) /* debug memory tracking supported */ -#define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */ -#define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegating to winbind helper */ - - -#define CURLOPTTYPE_LONG 0 -#define CURLOPTTYPE_OBJECTPOINT 10000 -#define CURLOPTTYPE_FUNCTIONPOINT 20000 -#define CURLOPTTYPE_OFF_T 30000 - -#define CINIT(%1,%2,%3) CURLOPT_%1 = %2 + %3 - - /* three convenient "aliases" that follow the name scheme better */ -#define CURLOPT_WRITEDATA CURLOPT_FILE -#define CURLOPT_READDATA CURLOPT_INFILE -#define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER -#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER - -/* This was added in version 7.19.1 */ -#define CURLOPT_POST301 CURLOPT_POSTREDIR - -/* The following were added in 7.17.0 */ -#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD -#define CURLOPT_FTPAPPEND CURLOPT_APPEND -#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY -#define CURLOPT_FTP_SSL CURLOPT_USE_SSL - -/* The following were added earlier */ - -#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD -#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL - -enum CURLoption { - /* This is the FILE * or void * the regular output should be written to. */ - CINIT(FILE, OBJECTPOINT, 1), - - /* The full URL to get/put */ - CINIT(URL, OBJECTPOINT, 2), - - /* Port number to connect to, if other than default. */ - CINIT(PORT, LONG, 3), - - /* Name of proxy to use. */ - CINIT(PROXY, OBJECTPOINT, 4), - - /* "name:password" to use when fetching. */ - CINIT(USERPWD, OBJECTPOINT, 5), - - /* "name:password" to use with proxy. */ - CINIT(PROXYUSERPWD, OBJECTPOINT, 6), - - /* Range to get, specified as an ASCII string. */ - CINIT(RANGE, OBJECTPOINT, 7), - - /* not used */ - - /* Specified file stream to upload from (use as input): */ - CINIT(INFILE, OBJECTPOINT, 9), - - /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE - * bytes big. If this is not used, error messages go to stderr instead: */ - CINIT(ERRORBUFFER, OBJECTPOINT, 10), - - /* Function that will be called to store the output (instead of fwrite). The - * parameters will use fwrite() syntax, make sure to follow them. */ - CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11), - - /* Function that will be called to read the input (instead of fread). The - * parameters will use fread() syntax, make sure to follow them. */ - CINIT(READFUNCTION, FUNCTIONPOINT, 12), - - /* Time-out the read operation after this amount of seconds */ - CINIT(TIMEOUT, LONG, 13), - - /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about - * how large the file being sent really is. That allows better error - * checking and better verifies that the upload was successful. -1 means - * unknown size. - * - * For large file support, there is also a _LARGE version of the key - * which takes an OFF_T type, allowing platforms with larger OFF_T - * sizes to handle larger files. See below for INFILESIZE_LARGE. - */ - CINIT(INFILESIZE, LONG, 14), - - /* POST static input fields. */ - CINIT(POSTFIELDS, OBJECTPOINT, 15), - - /* Set the referrer page (needed by some CGIs) */ - CINIT(REFERER, OBJECTPOINT, 16), - - /* Set the FTP PORT string (interface name, named or numerical IP address) - Use i.e '-' to use default address. */ - CINIT(FTPPORT, OBJECTPOINT, 17), - - /* Set the User-Agent string (examined by some CGIs) */ - CINIT(USERAGENT, OBJECTPOINT, 18), - - /* If the download receives less than "low speed limit" bytes/second - * during "low speed time" seconds, the operations is aborted. - * You could i.e if you have a pretty high speed connection, abort if - * it is less than 2000 bytes/sec during 20 seconds. - */ - - /* Set the "low speed limit" */ - CINIT(LOW_SPEED_LIMIT, LONG, 19), - - /* Set the "low speed time" */ - CINIT(LOW_SPEED_TIME, LONG, 20), - - /* Set the continuation offset. - * - * Note there is also a _LARGE version of this key which uses - * OFF_T types, allowing for large file offsets on platforms which - * use larger-than-32-bit OFF_T's. Look below for RESUME_FROM_LARGE. - */ - CINIT(RESUME_FROM, LONG, 21), - - /* Set cookie in request: */ - CINIT(COOKIE, OBJECTPOINT, 22), - - /* This points to a linked list of headers, struct curl_slist kind */ - CINIT(HTTPHEADER, OBJECTPOINT, 23), - - /* This points to a linked list of post entries, struct curl_httppost */ - CINIT(HTTPPOST, OBJECTPOINT, 24), - - /* name of the file keeping your private SSL-certificate */ - CINIT(SSLCERT, OBJECTPOINT, 25), - - /* password for the SSL or SSH private key */ - CINIT(KEYPASSWD, OBJECTPOINT, 26), - - /* send TYPE parameter? */ - CINIT(CRLF, LONG, 27), - - /* send linked-list of QUOTE commands */ - CINIT(QUOTE, OBJECTPOINT, 28), - - /* send FILE * or void * to store headers to, if you use a callback it - is simply passed to the callback unmodified */ - CINIT(WRITEHEADER, OBJECTPOINT, 29), - - /* point to a file to read the initial cookies from, also enables - "cookie awareness" */ - CINIT(COOKIEFILE, OBJECTPOINT, 31), - - /* What version to specifically try to use. - See CURL_SSLVERSION defines below. */ - CINIT(SSLVERSION, LONG, 32), - - /* What kind of HTTP time condition to use, see defines */ - CINIT(TIMECONDITION, LONG, 33), - - /* Time to use with the above condition. Specified in number of seconds - since 1 Jan 1970 */ - CINIT(TIMEVALUE, LONG, 34), - - /* 35 = OBSOLETE */ - - /* Custom request, for customizing the get command like - HTTP: DELETE, TRACE and others - FTP: to use a different list command - */ - CINIT(CUSTOMREQUEST, OBJECTPOINT, 36), - - /* HTTP request, for odd commands like DELETE, TRACE and others */ - CINIT(STDERR, OBJECTPOINT, 37), - - /* 38 is not used */ - - /* send linked-list of post-transfer QUOTE commands */ - CINIT(POSTQUOTE, OBJECTPOINT, 39), - - /* Pass a pointer to string of the output using full variable-replacement - as described elsewhere. */ - CINIT(WRITEINFO, OBJECTPOINT, 40), /* DEPRECATED, do not use! */ - - CINIT(VERBOSE, LONG, 41), /* talk a lot */ - CINIT(HEADER, LONG, 42), /* throw the header out too */ - CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */ - CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */ - CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */ - CINIT(UPLOAD, LONG, 46), /* this is an upload */ - CINIT(POST, LONG, 47), /* HTTP POST method */ - CINIT(DIRLISTONLY, LONG, 48), /* bare names when listing directories */ - - CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */ - - /* Specify whether to read the user+password from the .netrc or the URL. - * This must be one of the CURL_NETRC_* enums below. */ - CINIT(NETRC, LONG, 51), - - CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */ - - CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */ - CINIT(PUT, LONG, 54), /* HTTP PUT */ - - /* 55 = OBSOLETE */ - - /* Function that will be called instead of the internal progress display - * function. This function should be defined as the curl_progress_callback - * prototype defines. */ - CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56), - - /* Data passed to the progress callback */ - CINIT(PROGRESSDATA, OBJECTPOINT, 57), - - /* We want the referrer field set automatically when following locations */ - CINIT(AUTOREFERER, LONG, 58), - - /* Port of the proxy, can be set in the proxy string as well with: - "[host]:[port]" */ - CINIT(PROXYPORT, LONG, 59), - - /* size of the POST input data, if strlen() is not good to use */ - CINIT(POSTFIELDSIZE, LONG, 60), - - /* tunnel non-http operations through a HTTP proxy */ - CINIT(HTTPPROXYTUNNEL, LONG, 61), - - /* Set the interface string to use as outgoing network interface */ - CINIT(INTERFACE, OBJECTPOINT, 62), - - /* Set the krb4/5 security level, this also enables krb4/5 awareness. This - * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string - * is set but doesn't match one of these, 'private' will be used. */ - CINIT(KRBLEVEL, OBJECTPOINT, 63), - - /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ - CINIT(SSL_VERIFYPEER, LONG, 64), - - /* The CApath or CAfile used to validate the peer certificate - this option is used only if SSL_VERIFYPEER is true */ - CINIT(CAINFO, OBJECTPOINT, 65), - - /* 66 = OBSOLETE */ - /* 67 = OBSOLETE */ - - /* Maximum number of http redirects to follow */ - CINIT(MAXREDIRS, LONG, 68), - - /* Pass a LONG set to 1 to get the date of the requested document (if - possible)! Pass a zero to shut it off. */ - CINIT(FILETIME, LONG, 69), - - /* This points to a linked list of telnet options */ - CINIT(TELNETOPTIONS, OBJECTPOINT, 70), - - /* Max amount of cached alive connections */ - CINIT(MAXCONNECTS, LONG, 71), - - CINIT(CLOSEPOLICY, LONG, 72), /* DEPRECATED, do not use! */ - - /* 73 = OBSOLETE */ - - /* Set to explicitly use a new connection for the upcoming transfer. - Do not use this unless you're absolutely sure of this, as it makes the - operation slower and is less friendly for the network. */ - CINIT(FRESH_CONNECT, LONG, 74), - - /* Set to explicitly forbid the upcoming transfer's connection to be re-used - when done. Do not use this unless you're absolutely sure of this, as it - makes the operation slower and is less friendly for the network. */ - CINIT(FORBID_REUSE, LONG, 75), - - /* Set to a file name that contains random data for libcurl to use to - seed the random engine when doing SSL connects. */ - CINIT(RANDOM_FILE, OBJECTPOINT, 76), - - /* Set to the Entropy Gathering Daemon socket pathname */ - CINIT(EGDSOCKET, OBJECTPOINT, 77), - - /* Time-out connect operations after this amount of seconds, if connects - are OK within this time, then fine... This only aborts the connect - phase. [Only works on unix-style/SIGALRM operating systems] */ - CINIT(CONNECTTIMEOUT, LONG, 78), - - /* Function that will be called to store headers (instead of fwrite). The - * parameters will use fwrite() syntax, make sure to follow them. */ - CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79), - - /* Set this to force the HTTP request to get back to GET. Only really usable - if POST, PUT or a custom request have been used first. - */ - CINIT(HTTPGET, LONG, 80), - - /* Set if we should verify the Common name from the peer certificate in ssl - * handshake, set 1 to check existence, 2 to ensure that it matches the - * provided hostname. */ - CINIT(SSL_VERIFYHOST, LONG, 81), - - /* Specify which file name to write all known cookies in after completed - operation. Set file name to "-" (dash) to make it go to stdout. */ - CINIT(COOKIEJAR, OBJECTPOINT, 82), - - /* Specify which SSL ciphers to use */ - CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83), - - /* Specify which HTTP version to use! This must be set to one of the - CURL_HTTP_VERSION* enums set below. */ - CINIT(HTTP_VERSION, LONG, 84), - - /* Specifically switch on or off the FTP engine's use of the EPSV command. By - default, that one will always be attempted before the more traditional - PASV command. */ - CINIT(FTP_USE_EPSV, LONG, 85), - - /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ - CINIT(SSLCERTTYPE, OBJECTPOINT, 86), - - /* name of the file keeping your private SSL-key */ - CINIT(SSLKEY, OBJECTPOINT, 87), - - /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ - CINIT(SSLKEYTYPE, OBJECTPOINT, 88), - - /* crypto engine for the SSL-sub system */ - CINIT(SSLENGINE, OBJECTPOINT, 89), - - /* set the crypto engine for the SSL-sub system as default - the param has no meaning... - */ - CINIT(SSLENGINE_DEFAULT, LONG, 90), - - /* Non-zero value means to use the global dns cache */ - CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* DEPRECATED, do not use! */ - - /* DNS cache timeout */ - CINIT(DNS_CACHE_TIMEOUT, LONG, 92), - - /* send linked-list of pre-transfer QUOTE commands */ - CINIT(PREQUOTE, OBJECTPOINT, 93), - - /* set the debug function */ - CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94), - - /* set the data for the debug function */ - CINIT(DEBUGDATA, OBJECTPOINT, 95), - - /* mark this as start of a cookie session */ - CINIT(COOKIESESSION, LONG, 96), - - /* The CApath directory used to validate the peer certificate - this option is used only if SSL_VERIFYPEER is true */ - CINIT(CAPATH, OBJECTPOINT, 97), - - /* Instruct libcurl to use a smaller receive buffer */ - CINIT(BUFFERSIZE, LONG, 98), - - /* Instruct libcurl to not use any signal/alarm handlers, even when using - timeouts. This option is useful for multi-threaded applications. - See libcurl-the-guide for more background information. */ - CINIT(NOSIGNAL, LONG, 99), - - /* Provide a CURLShare for mutexing non-ts data */ - CINIT(SHARE, OBJECTPOINT, 100), - - /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), - CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */ - CINIT(PROXYTYPE, LONG, 101), - - /* Set the Accept-Encoding string. Use this to tell a server you would like - the response to be compressed. Before 7.21.6, this was known as - CURLOPT_ENCODING */ - CINIT(ACCEPT_ENCODING, OBJECTPOINT, 102), - - /* Set pointer to private data */ - CINIT(PRIVATE, OBJECTPOINT, 103), - - /* Set aliases for HTTP 200 in the HTTP Response header */ - CINIT(HTTP200ALIASES, OBJECTPOINT, 104), - - /* Continue to send authentication (user+password) when following locations, - even when hostname changed. This can potentially send off the name - and password to whatever host the server decides. */ - CINIT(UNRESTRICTED_AUTH, LONG, 105), - - /* Specifically switch on or off the FTP engine's use of the EPRT command ( - it also disables the LPRT attempt). By default, those ones will always be - attempted before the good old traditional PORT command. */ - CINIT(FTP_USE_EPRT, LONG, 106), - - /* Set this to a bitmask value to enable the particular authentications - methods you like. Use this in combination with CURLOPT_USERPWD. - Note that setting multiple bits may cause extra network round-trips. */ - CINIT(HTTPAUTH, LONG, 107), - - /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx - in second argument. The function must be matching the - curl_ssl_ctx_callback proto. */ - CINIT(SSL_CTX_FUNC, FUNCTIONPOINT, 108), - - /* Set the userdata for the ssl context callback function's third - argument */ - CINIT(SSL_CTX_DATA, OBJECTPOINT, 109), - - /* FTP Option that causes missing dirs to be created on the remote server. - In 7.19.4 we introduced the convenience enums for this option using the - CURLFTP_CREATE_DIR prefix. - */ - CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110), - - /* Set this to a bitmask value to enable the particular authentications - methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. - Note that setting multiple bits may cause extra network round-trips. */ - CINIT(PROXYAUTH, LONG, 111), - - /* FTP option that changes the timeout, in seconds, associated with - getting a response. This is different from transfer timeout time and - essentially places a demand on the FTP server to acknowledge commands - in a timely manner. */ - CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112), -#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT - - /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to - tell libcurl to resolve names to those IP versions only. This only has - affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */ - CINIT(IPRESOLVE, LONG, 113), - - /* Set this option to limit the size of a file that will be downloaded from - an HTTP or FTP server. - - Note there is also _LARGE version which adds large file support for - platforms which have larger OFF_T sizes. See MAXFILESIZE_LARGE below. */ - CINIT(MAXFILESIZE, LONG, 114), - - /* See the comment for INFILESIZE above, but in short, specifies - * the size of the file being uploaded. -1 means unknown. - */ - CINIT(INFILESIZE_LARGE, OFF_T, 115), - - /* Sets the continuation offset. There is also a LONG version of this; - * look above for RESUME_FROM. - */ - CINIT(RESUME_FROM_LARGE, OFF_T, 116), - - /* Sets the maximum size of data that will be downloaded from - * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. - */ - CINIT(MAXFILESIZE_LARGE, OFF_T, 117), - - /* Set this option to the file name of your .netrc file you want libcurl - to parse (using the CURLOPT_NETRC option). If not set, libcurl will do - a poor attempt to find the user's home directory and check for a .netrc - file in there. */ - CINIT(NETRC_FILE, OBJECTPOINT, 118), - - /* Enable SSL/TLS for FTP, pick one of: - CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise - CURLFTPSSL_CONTROL - SSL for the control connection or fail - CURLFTPSSL_ALL - SSL for all communication or fail - */ - CINIT(USE_SSL, LONG, 119), - - /* The _LARGE version of the standard POSTFIELDSIZE option */ - CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120), - - /* Enable/disable the TCP Nagle algorithm */ - CINIT(TCP_NODELAY, LONG, 121), - - /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ - /* 123 OBSOLETE. Gone in 7.16.0 */ - /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ - /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ - /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ - /* 127 OBSOLETE. Gone in 7.16.0 */ - /* 128 OBSOLETE. Gone in 7.16.0 */ - - /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option - can be used to change libcurl's default action which is to first try - "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK - response has been received. - - Available parameters are: - CURLFTPAUTH_DEFAULT - let libcurl decide - CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS - CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL - */ - CINIT(FTPSSLAUTH, LONG, 129), - - CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130), - CINIT(IOCTLDATA, OBJECTPOINT, 131), - - /* 132 OBSOLETE. Gone in 7.16.0 */ - /* 133 OBSOLETE. Gone in 7.16.0 */ - - /* zero terminated string for pass on to the FTP server when asked for - "account" info */ - CINIT(FTP_ACCOUNT, OBJECTPOINT, 134), - - /* feed cookies into cookie engine */ - CINIT(COOKIELIST, OBJECTPOINT, 135), - - /* ignore Content-Length */ - CINIT(IGNORE_CONTENT_LENGTH, LONG, 136), - - /* Set to non-zero to skip the IP address received in a 227 PASV FTP server - response. Typically used for FTP-SSL purposes but is not restricted to - that. libcurl will then instead use the same IP address it used for the - control connection. */ - CINIT(FTP_SKIP_PASV_IP, LONG, 137), - - /* Select "file method" to use when doing FTP, see the curl_ftpmethod - above. */ - CINIT(FTP_FILEMETHOD, LONG, 138), - - /* Local port number to bind the socket to */ - CINIT(LOCALPORT, LONG, 139), - - /* Number of ports to try, including the first one set with LOCALPORT. - Thus, setting it to 1 will make no additional attempts but the first. - */ - CINIT(LOCALPORTRANGE, LONG, 140), - - /* no transfer, set up connection and let application use the socket by - extracting it with CURLINFO_LASTSOCKET */ - CINIT(CONNECT_ONLY, LONG, 141), - - /* Function that will be called to convert from the - network encoding (instead of using the iconv calls in libcurl) */ - CINIT(CONV_FROM_NETWORK_FUNC, FUNCTIONPOINT, 142), - - /* Function that will be called to convert to the - network encoding (instead of using the iconv calls in libcurl) */ - CINIT(CONV_TO_NETWORK_FUNC, FUNCTIONPOINT, 143), - - /* Function that will be called to convert from UTF8 - (instead of using the iconv calls in libcurl) - Note that this is used only for SSL certificate processing */ - CINIT(CONV_FROM_UTF8_FUNC, FUNCTIONPOINT, 144), - - /* if the connection proceeds too quickly then need to slow it down */ - /* limit-rate: maximum number of bytes per second to send or receive */ - CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145), - CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146), - - /* Pointer to command string to send if USER/PASS fails. */ - CINIT(FTP_ALTERNATIVE_TO_USER, OBJECTPOINT, 147), - - /* callback function for setting socket options */ - CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148), - CINIT(SOCKOPTDATA, OBJECTPOINT, 149), - - /* set to 0 to disable session ID re-use for this transfer, default is - enabled (== 1) */ - CINIT(SSL_SESSIONID_CACHE, LONG, 150), - - /* allowed SSH authentication methods */ - CINIT(SSH_AUTH_TYPES, LONG, 151), - - /* Used by scp/sftp to do public/private key authentication */ - CINIT(SSH_PUBLIC_KEYFILE, OBJECTPOINT, 152), - CINIT(SSH_PRIVATE_KEYFILE, OBJECTPOINT, 153), - - /* Send CCC (Clear Command Channel) after authentication */ - CINIT(FTP_SSL_CCC, LONG, 154), - - /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ - CINIT(TIMEOUT_MS, LONG, 155), - CINIT(CONNECTTIMEOUT_MS, LONG, 156), - - /* set to zero to disable the libcurl's decoding and thus pass the raw body - data to the application even when it is encoded/compressed */ - CINIT(HTTP_TRANSFER_DECODING, LONG, 157), - CINIT(HTTP_CONTENT_DECODING, LONG, 158), - - /* Permission used when creating new files and directories on the remote - server for protocols that support it, SFTP/SCP/FILE */ - CINIT(NEW_FILE_PERMS, LONG, 159), - CINIT(NEW_DIRECTORY_PERMS, LONG, 160), - - /* Set the behaviour of POST when redirecting. Values must be set to one - of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ - CINIT(POSTREDIR, LONG, 161), - - /* used by scp/sftp to verify the host's public key */ - CINIT(SSH_HOST_PUBLIC_KEY_MD5, OBJECTPOINT, 162), - - /* Callback function for opening socket (instead of socket(2)). Optionally, - callback is able change the address or refuse to connect returning - CURL_SOCKET_BAD. The callback should have type - curl_opensocket_callback */ - CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163), - CINIT(OPENSOCKETDATA, OBJECTPOINT, 164), - - /* POST volatile input fields. */ - CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165), - - /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */ - CINIT(PROXY_TRANSFER_MODE, LONG, 166), - - /* Callback function for seeking in the input stream */ - CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167), - CINIT(SEEKDATA, OBJECTPOINT, 168), - - /* CRL file */ - CINIT(CRLFILE, OBJECTPOINT, 169), - - /* Issuer certificate */ - CINIT(ISSUERCERT, OBJECTPOINT, 170), - - /* (IPv6) Address scope */ - CINIT(ADDRESS_SCOPE, LONG, 171), - - /* Collect certificate chain info and allow it to get retrievable with - CURLINFO_CERTINFO after the transfer is complete. (Unfortunately) only - working with OpenSSL-powered builds. */ - CINIT(CERTINFO, LONG, 172), - - /* "name" and "pwd" to use when fetching. */ - CINIT(USERNAME, OBJECTPOINT, 173), - CINIT(PASSWORD, OBJECTPOINT, 174), - - /* "name" and "pwd" to use with Proxy when fetching. */ - CINIT(PROXYUSERNAME, OBJECTPOINT, 175), - CINIT(PROXYPASSWORD, OBJECTPOINT, 176), - - /* Comma separated list of hostnames defining no-proxy zones. These should - match both hostnames directly, and hostnames within a domain. For - example, local.com will match local.com and www.local.com, but NOT - notlocal.com or www.notlocal.com. For compatibility with other - implementations of this, .local.com will be considered to be the same as - local.com. A single * is the only valid wildcard, and effectively - disables the use of proxy. */ - CINIT(NOPROXY, OBJECTPOINT, 177), - - /* block size for TFTP transfers */ - CINIT(TFTP_BLKSIZE, LONG, 178), - - /* Socks Service */ - CINIT(SOCKS5_GSSAPI_SERVICE, OBJECTPOINT, 179), - - /* Socks Service */ - CINIT(SOCKS5_GSSAPI_NEC, LONG, 180), - - /* set the bitmask for the protocols that are allowed to be used for the - transfer, which thus helps the app which takes URLs from users or other - external inputs and want to restrict what protocol(s) to deal - with. Defaults to CURLPROTO_ALL. */ - CINIT(PROTOCOLS, LONG, 181), - - /* set the bitmask for the protocols that libcurl is allowed to follow to, - as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs - to be set in both bitmasks to be allowed to get redirected to. Defaults - to all protocols except FILE and SCP. */ - CINIT(REDIR_PROTOCOLS, LONG, 182), - - /* set the SSH knownhost file name to use */ - CINIT(SSH_KNOWNHOSTS, OBJECTPOINT, 183), - - /* set the SSH host key callback, must point to a curl_sshkeycallback - function */ - CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184), - - /* set the SSH host key callback custom pointer */ - CINIT(SSH_KEYDATA, OBJECTPOINT, 185), - - /* set the SMTP mail originator */ - CINIT(MAIL_FROM, OBJECTPOINT, 186), - - /* set the SMTP mail receiver(s) */ - CINIT(MAIL_RCPT, OBJECTPOINT, 187), - - /* FTP: send PRET before PASV */ - CINIT(FTP_USE_PRET, LONG, 188), - - /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ - CINIT(RTSP_REQUEST, LONG, 189), - - /* The RTSP session identifier */ - CINIT(RTSP_SESSION_ID, OBJECTPOINT, 190), - - /* The RTSP stream URI */ - CINIT(RTSP_STREAM_URI, OBJECTPOINT, 191), - - /* The Transport: header to use in RTSP requests */ - CINIT(RTSP_TRANSPORT, OBJECTPOINT, 192), - - /* Manually initialize the client RTSP CSeq for this handle */ - CINIT(RTSP_CLIENT_CSEQ, LONG, 193), - - /* Manually initialize the server RTSP CSeq for this handle */ - CINIT(RTSP_SERVER_CSEQ, LONG, 194), - - /* The stream to pass to INTERLEAVEFUNCTION. */ - CINIT(INTERLEAVEDATA, OBJECTPOINT, 195), - - /* Let the application define a custom write method for RTP data */ - CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196), - - /* Turn on wildcard matching */ - CINIT(WILDCARDMATCH, LONG, 197), - - /* Directory matching callback called before downloading of an - individual file (chunk) started */ - CINIT(CHUNK_BGN_FUNC, FUNCTIONPOINT, 198), - - /* Directory matching callback called after the file (chunk) - was downloaded, or skipped */ - CINIT(CHUNK_END_FUNC, FUNCTIONPOINT, 199), - - /* Change match (fnmatch-like) callback for wildcard matching */ - CINIT(FNMATCH_FUNC, FUNCTIONPOINT, 200), - - /* Let the application define custom chunk data pointer */ - CINIT(CHUNK_DATA, OBJECTPOINT, 201), - - /* FNMATCH_FUNC user pointer */ - CINIT(FNMATCH_DATA, OBJECTPOINT, 202), - - /* send linked-list of name:port:address sets */ - CINIT(RESOLVE, OBJECTPOINT, 203), - - /* Set a username for authenticated TLS */ - CINIT(TLSAUTH_USERNAME, OBJECTPOINT, 204), - - /* Set a password for authenticated TLS */ - CINIT(TLSAUTH_PASSWORD, OBJECTPOINT, 205), - - /* Set authentication type for authenticated TLS */ - CINIT(TLSAUTH_TYPE, OBJECTPOINT, 206), - - /* Set to 1 to enable the "TE:" header in HTTP requests to ask for - compressed transfer-encoded responses. Set to 0 to disable the use of TE: - in outgoing requests. The current default is 0, but it might change in a - future libcurl release. - - libcurl will ask for the compressed methods it knows of, and if that - isn't any, it will not ask for transfer-encoding at all even if this - option is set to 1. - - */ - CINIT(TRANSFER_ENCODING, LONG, 207), - - /* Callback function for closing socket (instead of close(2)). The callback - should have type curl_closesocket_callback */ - CINIT(CLOSESOCKETFUNCTION, FUNCTIONPOINT, 208), - CINIT(CLOSESOCKETDATA, OBJECTPOINT, 209), - - /* allow GSSAPI credential delegation */ - CINIT(GSSAPI_DELEGATION, LONG, 210), - - CURLOPT_LASTENTRY /* the last unused */ -}; - - -enum CURLcode { - CURLE_OK = 0, - CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ - CURLE_FAILED_INIT, /* 2 */ - CURLE_URL_MALFORMAT, /* 3 */ - CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for - 7.17.0, reused in April 2011 for 7.21.5] */ - CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ - CURLE_COULDNT_RESOLVE_HOST, /* 6 */ - CURLE_COULDNT_CONNECT, /* 7 */ - CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */ - CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server - due to lack of access - when login fails - this is not returned. */ - CURLE_OBSOLETE10, /* 10 - NOT USED */ - CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ - CURLE_OBSOLETE12, /* 12 - NOT USED */ - CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ - CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ - CURLE_FTP_CANT_GET_HOST, /* 15 */ - CURLE_OBSOLETE16, /* 16 - NOT USED */ - CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ - CURLE_PARTIAL_FILE, /* 18 */ - CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ - CURLE_OBSOLETE20, /* 20 - NOT USED */ - CURLE_QUOTE_ERROR, /* 21 - quote command failure */ - CURLE_HTTP_RETURNED_ERROR, /* 22 */ - CURLE_WRITE_ERROR, /* 23 */ - CURLE_OBSOLETE24, /* 24 - NOT USED */ - CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ - CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ - CURLE_OUT_OF_MEMORY, /* 27 */ - /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error - instead of a memory allocation error if CURL_DOES_CONVERSIONS - is defined - */ - CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ - CURLE_OBSOLETE29, /* 29 - NOT USED */ - CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ - CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ - CURLE_OBSOLETE32, /* 32 - NOT USED */ - CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ - CURLE_HTTP_POST_ERROR, /* 34 */ - CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ - CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ - CURLE_FILE_COULDNT_READ_FILE, /* 37 */ - CURLE_LDAP_CANNOT_BIND, /* 38 */ - CURLE_LDAP_SEARCH_FAILED, /* 39 */ - CURLE_OBSOLETE40, /* 40 - NOT USED */ - CURLE_FUNCTION_NOT_FOUND, /* 41 */ - CURLE_ABORTED_BY_CALLBACK, /* 42 */ - CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ - CURLE_OBSOLETE44, /* 44 - NOT USED */ - CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ - CURLE_OBSOLETE46, /* 46 - NOT USED */ - CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */ - CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */ - CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */ - CURLE_OBSOLETE50, /* 50 - NOT USED */ - CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint - wasn't verified fine */ - CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ - CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ - CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as - default */ - CURLE_SEND_ERROR, /* 55 - failed sending network data */ - CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ - CURLE_OBSOLETE57, /* 57 - NOT IN USE */ - CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ - CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ - CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */ - CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */ - CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ - CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ - CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ - CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind - that failed */ - CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ - CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not - accepted and we failed to login */ - CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ - CURLE_TFTP_PERM, /* 69 - permission problem on server */ - CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ - CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ - CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ - CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ - CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ - CURLE_CONV_FAILED, /* 75 - conversion failed */ - CURLE_CONV_REQD, /* 76 - caller must register conversion - callbacks using curl_easy_setopt options - CURLOPT_CONV_FROM_NETWORK_FUNCTION, - CURLOPT_CONV_TO_NETWORK_FUNCTION, and - CURLOPT_CONV_FROM_UTF8_FUNCTION */ - CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing - or wrong format */ - CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ - CURLE_SSH, /* 79 - error from the SSH layer, somewhat - generic so the error message will be of - interest when this has happened */ - - CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL - connection */ - CURLE_AGAIN, /* 81 - socket is not ready for send/recv, - wait till it's ready and try again (Added - in 7.18.2) */ - CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or - wrong format (Added in 7.19.0) */ - CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in - 7.19.0) */ - CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */ - CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */ - CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */ - CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */ - CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */ - - CURL_LAST /* never use! */ -}; - -/* compatibility with older names */ -#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING - -/* The following were added in 7.21.5, April 2011 */ -#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION - -enum curl_TimeCond { - CURL_TIMECOND_NONE, - - CURL_TIMECOND_IFMODSINCE, - CURL_TIMECOND_IFUNMODSINCE, - CURL_TIMECOND_LASTMOD, - - CURL_TIMECOND_LAST -}; - -/* These enums are for use with the CURLOPT_NETRC option. */ -enum CURL_NETRC_OPTION { - CURL_NETRC_IGNORED, /* The .netrc will never be read. - * This is the default. */ - CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred - * to one in the .netrc. */ - CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. - * Unless one is set programmatically, the .netrc - * will be queried. */ - CURL_NETRC_LAST -}; - -enum curl_closepolicy { - CURLCLOSEPOLICY_NONE, /* first, never use this */ - - CURLCLOSEPOLICY_OLDEST, - CURLCLOSEPOLICY_LEAST_RECENTLY, // CURLCLOSEPOLICY_LEAST_RECENTLY_USED - CURLCLOSEPOLICY_LEAST_TRAFFIC, - CURLCLOSEPOLICY_SLOWEST, - CURLCLOSEPOLICY_CALLBACK, - - CURLCLOSEPOLICY_LAST /* last, never use this */ -}; - -enum { - CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd - like the library to choose the best possible - for us! */ - CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ - CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ - - CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ -}; - - -#define CURLAUTH_NONE 0 /* nothing */ -#define CURLAUTH_BASIC (1<<0) /* Basic (default) */ -#define CURLAUTH_DIGEST (1<<1) /* Digest */ -#define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */ -#define CURLAUTH_NTLM (1<<3) /* NTLM */ -#define CURLAUTH_DIGEST_IE (1<<4) /* Digest with IE flavour */ -#define CURLAUTH_NTLM_WB (1<<5) /* NTLM delegating to winbind helper */ -#define CURLAUTH_ONLY (1<<31) /* used together with a single other - type to force no auth or just that - single type */ -#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) /* all fine types set */ -#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) - - -/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ -enum curl_ftpcreatedir { - CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ - CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD - again if MKD succeeded, for SFTP this does - similar magic */ - CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD - again even if MKD failed! */ - CURLFTP_CREATE_DIR_LAST /* not an option, never use */ -}; - - - /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host - name resolves addresses using more than one IP protocol version, this - option might be handy to force libcurl to use a specific IP version. */ -#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP - versions that your system allows */ -#define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */ -#define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */ - - -/* parameter for the CURLOPT_USE_SSL option */ -enum curl_usessl { - CURLUSESSL_NONE, /* do not attempt to use SSL */ - CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ - CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ - CURLUSESSL_ALL, /* SSL for all communication or fail */ - CURLUSESSL_LAST /* not an option, never use */ -}; - - -enum { - CURL_SSLVERSION_DEFAULT, - CURL_SSLVERSION_TLSv1, - CURL_SSLVERSION_SSLv2, - CURL_SSLVERSION_SSLv3, - - CURL_SSLVERSION_LAST /* never use, keep last */ -}; - - -/* parameter for the CURLOPT_FTPSSLAUTH option */ -enum curl_ftpauth { - CURLFTPAUTH_DEFAULT, /* let libcurl decide */ - CURLFTPAUTH_SSL, /* use "AUTH SSL" */ - CURLFTPAUTH_TLS, /* use "AUTH TLS" */ - CURLFTPAUTH_LAST /* not an option, never use */ -}; - - -enum curl_ftpfile { - FTPFILE_MULTICWD = 1, /* as defined by RFC1738 */ - FTPFILE_NOCWD = 2, /* use SIZE / RETR / STOR on the full path */ - FTPFILE_SINGLECWD = 3 /* make one CWD, then SIZE / RETR / STOR on the file */ -}; - - -#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ -#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ -#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ -#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ -#define CURLSSH_AUTH_HOST (1<<2) /* host key files */ -#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ -#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY - -#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */ -#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */ -#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */ - - -/* parameter for the CURLOPT_FTP_SSL_CCC option */ -enum curl_ftpccc { - CURLFTPSSL_CCC_NONE, /* do not send CCC */ - CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ - CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ - CURLFTPSSL_CCC_LAST /* not an option, never use */ -}; - - -/* symbols to use with CURLOPT_POSTREDIR. - CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that - CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL */ - -#define CURL_REDIR_GET_ALL 0 -#define CURL_REDIR_POST_301 1 -#define CURL_REDIR_POST_302 2 -#define CURL_REDIR_POST_ALL (CURL_REDIR_POST_301|CURL_REDIR_POST_302) - - -/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ -#define CURLPROTO_HTTP (1<<0) -#define CURLPROTO_HTTPS (1<<1) -#define CURLPROTO_FTP (1<<2) -#define CURLPROTO_FTPS (1<<3) -#define CURLPROTO_SCP (1<<4) -#define CURLPROTO_SFTP (1<<5) -#define CURLPROTO_TELNET (1<<6) -#define CURLPROTO_LDAP (1<<7) -#define CURLPROTO_LDAPS (1<<8) -#define CURLPROTO_DICT (1<<9) -#define CURLPROTO_FILE (1<<10) -#define CURLPROTO_TFTP (1<<11) -#define CURLPROTO_IMAP (1<<12) -#define CURLPROTO_IMAPS (1<<13) -#define CURLPROTO_POP3 (1<<14) -#define CURLPROTO_POP3S (1<<15) -#define CURLPROTO_SMTP (1<<16) -#define CURLPROTO_SMTPS (1<<17) -#define CURLPROTO_RTSP (1<<18) -#define CURLPROTO_RTMP (1<<19) -#define CURLPROTO_RTMPT (1<<20) -#define CURLPROTO_RTMPE (1<<21) -#define CURLPROTO_RTMPTE (1<<22) -#define CURLPROTO_RTMPS (1<<23) -#define CURLPROTO_RTMPTS (1<<24) -#define CURLPROTO_GOPHER (1<<25) -#define CURLPROTO_ALL (~0) /* enable everything */ - - -/* - * Public API enums for RTSP requests - */ -enum { - CURL_RTSPREQ_NONE, /* first in list */ - CURL_RTSPREQ_OPTIONS, - CURL_RTSPREQ_DESCRIBE, - CURL_RTSPREQ_ANNOUNCE, - CURL_RTSPREQ_SETUP, - CURL_RTSPREQ_PLAY, - CURL_RTSPREQ_PAUSE, - CURL_RTSPREQ_TEARDOWN, - CURL_RTSPREQ_GET_PARAMETER, - CURL_RTSPREQ_SET_PARAMETER, - CURL_RTSPREQ_RECORD, - CURL_RTSPREQ_RECEIVE, - CURL_RTSPREQ_LAST /* last in list */ -}; - - - -#define CURLINFO_STRING 0x100000 -#define CURLINFO_LONG 0x200000 -#define CURLINFO_DOUBLE 0x300000 -#define CURLINFO_SLIST 0x400000 -#define CURLINFO_MASK 0x0fffff -#define CURLINFO_TYPEMASK 0xf00000 - -enum CURLINFO { - CURLINFO_NONE, /* first, never use this */ - CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, - CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, - CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, - CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, - CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, - CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, - CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, - CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, - CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, - CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, - CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, - CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, - CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, - CURLINFO_FILETIME = CURLINFO_LONG + 14, - CURLINFO_CONTENT_LEN_DOWNLOAD = CURLINFO_DOUBLE + 15, - CURLINFO_CONTENT_LEN_UPLOAD = CURLINFO_DOUBLE + 16, - CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, - CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, - CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, - CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, - CURLINFO_PRIVATE = CURLINFO_STRING + 21, - CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, - CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, - CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, - CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, - CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, - CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, - CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, - CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, - CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, - CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, - CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, - CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, - CURLINFO_CERTINFO = CURLINFO_SLIST + 34, - CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, - CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36, - CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37, - CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38, - CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39, - CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40, - CURLINFO_LOCAL_IP = CURLINFO_STRING + 41, - CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42, - /* Fill in new entries below here! */ - - CURLINFO_LASTONE = 42 -}; - - -enum curl_proxytype { - CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use - CONNECT HTTP/1.1 */ - CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT - HTTP/1.0 */ - CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already - in 7.10 */ - CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ - CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ - CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the - host name rather than the IP address. added - in 7.18.0 */ -}; - - -enum CURLformoption { - CURLFORM_NOTHING, /********* the first one is unused ************/ - /* */ - CURLFORM_COPYNAME, // char - CURLFORM_PTRNAME, // not support - CURLFORM_NAMELENGTH, // long - CURLFORM_COPYCONTENTS, // char - CURLFORM_PTRCONTENTS, // not support - CURLFORM_CONTENTSLENGTH, // long - CURLFORM_FILECONTENT, // char - CURLFORM_ARRAY, // not support - CURLFORM_OBSOLETE, - CURLFORM_FILE, // char - CURLFORM_BUFFER, // not support - CURLFORM_BUFFERPTR, // not support - CURLFORM_BUFFERLENGTH, // not support - CURLFORM_CONTENTTYPE, // char - CURLFORM_CONTENTHEADER, // curl_slist - CURLFORM_FILENAME, // char - CURLFORM_END, // !! - CURLFORM_OBSOLETE2, - CURLFORM_STREAM, // not support - CURLFORM_LASTENTRY /* the last unused */ -}; - -enum CURLFORMcode { - CURL_FORMADD_OK, /* first, no error */ - CURL_FORMADD_MEMORY, - CURL_FORMADD_OPTION_TWICE, - CURL_FORMADD_NULL, - CURL_FORMADD_UNKNOWN_OPTION, - CURL_FORMADD_INCOMPLETE, - CURL_FORMADD_ILLEGAL_ARRAY, - CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ - CURL_FORMADD_LAST /* last */ -}; |