#if defined _cURL_header_included #endinput #endif #define _cURL_header_included /* SourceMod */ #define LONG CURLOPTTYPE_LONG #define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT #define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT #define OFF_T CURLOPTTYPE_OFF_T #define CURL_MAX_WRITE_SIZE 16384 #define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ #define CURL_VERSION_KERBEROS4 (1<<1) /* kerberos auth is supported */ #define CURL_VERSION_SSL (1<<2) /* SSL options are present */ #define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ #define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ #define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth support */ #define CURL_VERSION_DEBUG (1<<6) /* built with debug capabilities */ #define CURL_VERSION_ASYNCHDNS (1<<7) /* asynchronous dns resolves */ #define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth */ #define CURL_VERSION_LARGEFILE (1<<9) /* supports files bigger than 2GB */ #define CURL_VERSION_IDN (1<<10) /* International Domain Names support */ #define CURL_VERSION_SSPI (1<<11) /* SSPI is supported */ #define CURL_VERSION_CONV (1<<12) /* character conversions supported */ #define CURL_VERSION_CURLDEBUG (1<<13) /* debug memory tracking supported */ #define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */ #define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegating to winbind helper */ #define CURLOPTTYPE_LONG 0 #define CURLOPTTYPE_OBJECTPOINT 10000 #define CURLOPTTYPE_FUNCTIONPOINT 20000 #define CURLOPTTYPE_OFF_T 30000 #define CINIT(%1,%2,%3) CURLOPT_%1 = %2 + %3 /* three convenient "aliases" that follow the name scheme better */ #define CURLOPT_WRITEDATA CURLOPT_FILE #define CURLOPT_READDATA CURLOPT_INFILE #define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER #define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER /* This was added in version 7.19.1 */ #define CURLOPT_POST301 CURLOPT_POSTREDIR /* The following were added in 7.17.0 */ #define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD #define CURLOPT_FTPAPPEND CURLOPT_APPEND #define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY #define CURLOPT_FTP_SSL CURLOPT_USE_SSL /* The following were added earlier */ #define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD #define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL enum CURLoption { /* This is the FILE * or void * the regular output should be written to. */ CINIT(FILE, OBJECTPOINT, 1), /* The full URL to get/put */ CINIT(URL, OBJECTPOINT, 2), /* Port number to connect to, if other than default. */ CINIT(PORT, LONG, 3), /* Name of proxy to use. */ CINIT(PROXY, OBJECTPOINT, 4), /* "name:password" to use when fetching. */ CINIT(USERPWD, OBJECTPOINT, 5), /* "name:password" to use with proxy. */ CINIT(PROXYUSERPWD, OBJECTPOINT, 6), /* Range to get, specified as an ASCII string. */ CINIT(RANGE, OBJECTPOINT, 7), /* not used */ /* Specified file stream to upload from (use as input): */ CINIT(INFILE, OBJECTPOINT, 9), /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE * bytes big. If this is not used, error messages go to stderr instead: */ CINIT(ERRORBUFFER, OBJECTPOINT, 10), /* Function that will be called to store the output (instead of fwrite). The * parameters will use fwrite() syntax, make sure to follow them. */ CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11), /* Function that will be called to read the input (instead of fread). The * parameters will use fread() syntax, make sure to follow them. */ CINIT(READFUNCTION, FUNCTIONPOINT, 12), /* Time-out the read operation after this amount of seconds */ CINIT(TIMEOUT, LONG, 13), /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about * how large the file being sent really is. That allows better error * checking and better verifies that the upload was successful. -1 means * unknown size. * * For large file support, there is also a _LARGE version of the key * which takes an OFF_T type, allowing platforms with larger OFF_T * sizes to handle larger files. See below for INFILESIZE_LARGE. */ CINIT(INFILESIZE, LONG, 14), /* POST static input fields. */ CINIT(POSTFIELDS, OBJECTPOINT, 15), /* Set the referrer page (needed by some CGIs) */ CINIT(REFERER, OBJECTPOINT, 16), /* Set the FTP PORT string (interface name, named or numerical IP address) Use i.e '-' to use default address. */ CINIT(FTPPORT, OBJECTPOINT, 17), /* Set the User-Agent string (examined by some CGIs) */ CINIT(USERAGENT, OBJECTPOINT, 18), /* If the download receives less than "low speed limit" bytes/second * during "low speed time" seconds, the operations is aborted. * You could i.e if you have a pretty high speed connection, abort if * it is less than 2000 bytes/sec during 20 seconds. */ /* Set the "low speed limit" */ CINIT(LOW_SPEED_LIMIT, LONG, 19), /* Set the "low speed time" */ CINIT(LOW_SPEED_TIME, LONG, 20), /* Set the continuation offset. * * Note there is also a _LARGE version of this key which uses * OFF_T types, allowing for large file offsets on platforms which * use larger-than-32-bit OFF_T's. Look below for RESUME_FROM_LARGE. */ CINIT(RESUME_FROM, LONG, 21), /* Set cookie in request: */ CINIT(COOKIE, OBJECTPOINT, 22), /* This points to a linked list of headers, struct curl_slist kind */ CINIT(HTTPHEADER, OBJECTPOINT, 23), /* This points to a linked list of post entries, struct curl_httppost */ CINIT(HTTPPOST, OBJECTPOINT, 24), /* name of the file keeping your private SSL-certificate */ CINIT(SSLCERT, OBJECTPOINT, 25), /* password for the SSL or SSH private key */ CINIT(KEYPASSWD, OBJECTPOINT, 26), /* send TYPE parameter? */ CINIT(CRLF, LONG, 27), /* send linked-list of QUOTE commands */ CINIT(QUOTE, OBJECTPOINT, 28), /* send FILE * or void * to store headers to, if you use a callback it is simply passed to the callback unmodified */ CINIT(WRITEHEADER, OBJECTPOINT, 29), /* point to a file to read the initial cookies from, also enables "cookie awareness" */ CINIT(COOKIEFILE, OBJECTPOINT, 31), /* What version to specifically try to use. See CURL_SSLVERSION defines below. */ CINIT(SSLVERSION, LONG, 32), /* What kind of HTTP time condition to use, see defines */ CINIT(TIMECONDITION, LONG, 33), /* Time to use with the above condition. Specified in number of seconds since 1 Jan 1970 */ CINIT(TIMEVALUE, LONG, 34), /* 35 = OBSOLETE */ /* Custom request, for customizing the get command like HTTP: DELETE, TRACE and others FTP: to use a different list command */ CINIT(CUSTOMREQUEST, OBJECTPOINT, 36), /* HTTP request, for odd commands like DELETE, TRACE and others */ CINIT(STDERR, OBJECTPOINT, 37), /* 38 is not used */ /* send linked-list of post-transfer QUOTE commands */ CINIT(POSTQUOTE, OBJECTPOINT, 39), /* Pass a pointer to string of the output using full variable-replacement as described elsewhere. */ CINIT(WRITEINFO, OBJECTPOINT, 40), /* DEPRECATED, do not use! */ CINIT(VERBOSE, LONG, 41), /* talk a lot */ CINIT(HEADER, LONG, 42), /* throw the header out too */ CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */ CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */ CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */ CINIT(UPLOAD, LONG, 46), /* this is an upload */ CINIT(POST, LONG, 47), /* HTTP POST method */ CINIT(DIRLISTONLY, LONG, 48), /* bare names when listing directories */ CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */ /* Specify whether to read the user+password from the .netrc or the URL. * This must be one of the CURL_NETRC_* enums below. */ CINIT(NETRC, LONG, 51), CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */ CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */ CINIT(PUT, LONG, 54), /* HTTP PUT */ /* 55 = OBSOLETE */ /* Function that will be called instead of the internal progress display * function. This function should be defined as the curl_progress_callback * prototype defines. */ CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56), /* Data passed to the progress callback */ CINIT(PROGRESSDATA, OBJECTPOINT, 57), /* We want the referrer field set automatically when following locations */ CINIT(AUTOREFERER, LONG, 58), /* Port of the proxy, can be set in the proxy string as well with: "[host]:[port]" */ CINIT(PROXYPORT, LONG, 59), /* size of the POST input data, if strlen() is not good to use */ CINIT(POSTFIELDSIZE, LONG, 60), /* tunnel non-http operations through a HTTP proxy */ CINIT(HTTPPROXYTUNNEL, LONG, 61), /* Set the interface string to use as outgoing network interface */ CINIT(INTERFACE, OBJECTPOINT, 62), /* Set the krb4/5 security level, this also enables krb4/5 awareness. This * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string * is set but doesn't match one of these, 'private' will be used. */ CINIT(KRBLEVEL, OBJECTPOINT, 63), /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ CINIT(SSL_VERIFYPEER, LONG, 64), /* The CApath or CAfile used to validate the peer certificate this option is used only if SSL_VERIFYPEER is true */ CINIT(CAINFO, OBJECTPOINT, 65), /* 66 = OBSOLETE */ /* 67 = OBSOLETE */ /* Maximum number of http redirects to follow */ CINIT(MAXREDIRS, LONG, 68), /* Pass a LONG set to 1 to get the date of the requested document (if possible)! Pass a zero to shut it off. */ CINIT(FILETIME, LONG, 69), /* This points to a linked list of telnet options */ CINIT(TELNETOPTIONS, OBJECTPOINT, 70), /* Max amount of cached alive connections */ CINIT(MAXCONNECTS, LONG, 71), CINIT(CLOSEPOLICY, LONG, 72), /* DEPRECATED, do not use! */ /* 73 = OBSOLETE */ /* Set to explicitly use a new connection for the upcoming transfer. Do not use this unless you're absolutely sure of this, as it makes the operation slower and is less friendly for the network. */ CINIT(FRESH_CONNECT, LONG, 74), /* Set to explicitly forbid the upcoming transfer's connection to be re-used when done. Do not use this unless you're absolutely sure of this, as it makes the operation slower and is less friendly for the network. */ CINIT(FORBID_REUSE, LONG, 75), /* Set to a file name that contains random data for libcurl to use to seed the random engine when doing SSL connects. */ CINIT(RANDOM_FILE, OBJECTPOINT, 76), /* Set to the Entropy Gathering Daemon socket pathname */ CINIT(EGDSOCKET, OBJECTPOINT, 77), /* Time-out connect operations after this amount of seconds, if connects are OK within this time, then fine... This only aborts the connect phase. [Only works on unix-style/SIGALRM operating systems] */ CINIT(CONNECTTIMEOUT, LONG, 78), /* Function that will be called to store headers (instead of fwrite). The * parameters will use fwrite() syntax, make sure to follow them. */ CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79), /* Set this to force the HTTP request to get back to GET. Only really usable if POST, PUT or a custom request have been used first. */ CINIT(HTTPGET, LONG, 80), /* Set if we should verify the Common name from the peer certificate in ssl * handshake, set 1 to check existence, 2 to ensure that it matches the * provided hostname. */ CINIT(SSL_VERIFYHOST, LONG, 81), /* Specify which file name to write all known cookies in after completed operation. Set file name to "-" (dash) to make it go to stdout. */ CINIT(COOKIEJAR, OBJECTPOINT, 82), /* Specify which SSL ciphers to use */ CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83), /* Specify which HTTP version to use! This must be set to one of the CURL_HTTP_VERSION* enums set below. */ CINIT(HTTP_VERSION, LONG, 84), /* Specifically switch on or off the FTP engine's use of the EPSV command. By default, that one will always be attempted before the more traditional PASV command. */ CINIT(FTP_USE_EPSV, LONG, 85), /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ CINIT(SSLCERTTYPE, OBJECTPOINT, 86), /* name of the file keeping your private SSL-key */ CINIT(SSLKEY, OBJECTPOINT, 87), /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ CINIT(SSLKEYTYPE, OBJECTPOINT, 88), /* crypto engine for the SSL-sub system */ CINIT(SSLENGINE, OBJECTPOINT, 89), /* set the crypto engine for the SSL-sub system as default the param has no meaning... */ CINIT(SSLENGINE_DEFAULT, LONG, 90), /* Non-zero value means to use the global dns cache */ CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* DEPRECATED, do not use! */ /* DNS cache timeout */ CINIT(DNS_CACHE_TIMEOUT, LONG, 92), /* send linked-list of pre-transfer QUOTE commands */ CINIT(PREQUOTE, OBJECTPOINT, 93), /* set the debug function */ CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94), /* set the data for the debug function */ CINIT(DEBUGDATA, OBJECTPOINT, 95), /* mark this as start of a cookie session */ CINIT(COOKIESESSION, LONG, 96), /* The CApath directory used to validate the peer certificate this option is used only if SSL_VERIFYPEER is true */ CINIT(CAPATH, OBJECTPOINT, 97), /* Instruct libcurl to use a smaller receive buffer */ CINIT(BUFFERSIZE, LONG, 98), /* Instruct libcurl to not use any signal/alarm handlers, even when using timeouts. This option is useful for multi-threaded applications. See libcurl-the-guide for more background information. */ CINIT(NOSIGNAL, LONG, 99), /* Provide a CURLShare for mutexing non-ts data */ CINIT(SHARE, OBJECTPOINT, 100), /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */ CINIT(PROXYTYPE, LONG, 101), /* Set the Accept-Encoding string. Use this to tell a server you would like the response to be compressed. Before 7.21.6, this was known as CURLOPT_ENCODING */ CINIT(ACCEPT_ENCODING, OBJECTPOINT, 102), /* Set pointer to private data */ CINIT(PRIVATE, OBJECTPOINT, 103), /* Set aliases for HTTP 200 in the HTTP Response header */ CINIT(HTTP200ALIASES, OBJECTPOINT, 104), /* Continue to send authentication (user+password) when following locations, even when hostname changed. This can potentially send off the name and password to whatever host the server decides. */ CINIT(UNRESTRICTED_AUTH, LONG, 105), /* Specifically switch on or off the FTP engine's use of the EPRT command ( it also disables the LPRT attempt). By default, those ones will always be attempted before the good old traditional PORT command. */ CINIT(FTP_USE_EPRT, LONG, 106), /* Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_USERPWD. Note that setting multiple bits may cause extra network round-trips. */ CINIT(HTTPAUTH, LONG, 107), /* Set the ssl context callback function, currently only for OpenSSL ssl_ctx in second argument. The function must be matching the curl_ssl_ctx_callback proto. */ CINIT(SSL_CTX_FUNC, FUNCTIONPOINT, 108), /* Set the userdata for the ssl context callback function's third argument */ CINIT(SSL_CTX_DATA, OBJECTPOINT, 109), /* FTP Option that causes missing dirs to be created on the remote server. In 7.19.4 we introduced the convenience enums for this option using the CURLFTP_CREATE_DIR prefix. */ CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110), /* Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. Note that setting multiple bits may cause extra network round-trips. */ CINIT(PROXYAUTH, LONG, 111), /* FTP option that changes the timeout, in seconds, associated with getting a response. This is different from transfer timeout time and essentially places a demand on the FTP server to acknowledge commands in a timely manner. */ CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112), #define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to tell libcurl to resolve names to those IP versions only. This only has affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */ CINIT(IPRESOLVE, LONG, 113), /* Set this option to limit the size of a file that will be downloaded from an HTTP or FTP server. Note there is also _LARGE version which adds large file support for platforms which have larger OFF_T sizes. See MAXFILESIZE_LARGE below. */ CINIT(MAXFILESIZE, LONG, 114), /* See the comment for INFILESIZE above, but in short, specifies * the size of the file being uploaded. -1 means unknown. */ CINIT(INFILESIZE_LARGE, OFF_T, 115), /* Sets the continuation offset. There is also a LONG version of this; * look above for RESUME_FROM. */ CINIT(RESUME_FROM_LARGE, OFF_T, 116), /* Sets the maximum size of data that will be downloaded from * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. */ CINIT(MAXFILESIZE_LARGE, OFF_T, 117), /* Set this option to the file name of your .netrc file you want libcurl to parse (using the CURLOPT_NETRC option). If not set, libcurl will do a poor attempt to find the user's home directory and check for a .netrc file in there. */ CINIT(NETRC_FILE, OBJECTPOINT, 118), /* Enable SSL/TLS for FTP, pick one of: CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise CURLFTPSSL_CONTROL - SSL for the control connection or fail CURLFTPSSL_ALL - SSL for all communication or fail */ CINIT(USE_SSL, LONG, 119), /* The _LARGE version of the standard POSTFIELDSIZE option */ CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120), /* Enable/disable the TCP Nagle algorithm */ CINIT(TCP_NODELAY, LONG, 121), /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ /* 123 OBSOLETE. Gone in 7.16.0 */ /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ /* 127 OBSOLETE. Gone in 7.16.0 */ /* 128 OBSOLETE. Gone in 7.16.0 */ /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option can be used to change libcurl's default action which is to first try "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK response has been received. Available parameters are: CURLFTPAUTH_DEFAULT - let libcurl decide CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL */ CINIT(FTPSSLAUTH, LONG, 129), CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130), CINIT(IOCTLDATA, OBJECTPOINT, 131), /* 132 OBSOLETE. Gone in 7.16.0 */ /* 133 OBSOLETE. Gone in 7.16.0 */ /* zero terminated string for pass on to the FTP server when asked for "account" info */ CINIT(FTP_ACCOUNT, OBJECTPOINT, 134), /* feed cookies into cookie engine */ CINIT(COOKIELIST, OBJECTPOINT, 135), /* ignore Content-Length */ CINIT(IGNORE_CONTENT_LENGTH, LONG, 136), /* Set to non-zero to skip the IP address received in a 227 PASV FTP server response. Typically used for FTP-SSL purposes but is not restricted to that. libcurl will then instead use the same IP address it used for the control connection. */ CINIT(FTP_SKIP_PASV_IP, LONG, 137), /* Select "file method" to use when doing FTP, see the curl_ftpmethod above. */ CINIT(FTP_FILEMETHOD, LONG, 138), /* Local port number to bind the socket to */ CINIT(LOCALPORT, LONG, 139), /* Number of ports to try, including the first one set with LOCALPORT. Thus, setting it to 1 will make no additional attempts but the first. */ CINIT(LOCALPORTRANGE, LONG, 140), /* no transfer, set up connection and let application use the socket by extracting it with CURLINFO_LASTSOCKET */ CINIT(CONNECT_ONLY, LONG, 141), /* Function that will be called to convert from the network encoding (instead of using the iconv calls in libcurl) */ CINIT(CONV_FROM_NETWORK_FUNC, FUNCTIONPOINT, 142), /* Function that will be called to convert to the network encoding (instead of using the iconv calls in libcurl) */ CINIT(CONV_TO_NETWORK_FUNC, FUNCTIONPOINT, 143), /* Function that will be called to convert from UTF8 (instead of using the iconv calls in libcurl) Note that this is used only for SSL certificate processing */ CINIT(CONV_FROM_UTF8_FUNC, FUNCTIONPOINT, 144), /* if the connection proceeds too quickly then need to slow it down */ /* limit-rate: maximum number of bytes per second to send or receive */ CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145), CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146), /* Pointer to command string to send if USER/PASS fails. */ CINIT(FTP_ALTERNATIVE_TO_USER, OBJECTPOINT, 147), /* callback function for setting socket options */ CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148), CINIT(SOCKOPTDATA, OBJECTPOINT, 149), /* set to 0 to disable session ID re-use for this transfer, default is enabled (== 1) */ CINIT(SSL_SESSIONID_CACHE, LONG, 150), /* allowed SSH authentication methods */ CINIT(SSH_AUTH_TYPES, LONG, 151), /* Used by scp/sftp to do public/private key authentication */ CINIT(SSH_PUBLIC_KEYFILE, OBJECTPOINT, 152), CINIT(SSH_PRIVATE_KEYFILE, OBJECTPOINT, 153), /* Send CCC (Clear Command Channel) after authentication */ CINIT(FTP_SSL_CCC, LONG, 154), /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ CINIT(TIMEOUT_MS, LONG, 155), CINIT(CONNECTTIMEOUT_MS, LONG, 156), /* set to zero to disable the libcurl's decoding and thus pass the raw body data to the application even when it is encoded/compressed */ CINIT(HTTP_TRANSFER_DECODING, LONG, 157), CINIT(HTTP_CONTENT_DECODING, LONG, 158), /* Permission used when creating new files and directories on the remote server for protocols that support it, SFTP/SCP/FILE */ CINIT(NEW_FILE_PERMS, LONG, 159), CINIT(NEW_DIRECTORY_PERMS, LONG, 160), /* Set the behaviour of POST when redirecting. Values must be set to one of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ CINIT(POSTREDIR, LONG, 161), /* used by scp/sftp to verify the host's public key */ CINIT(SSH_HOST_PUBLIC_KEY_MD5, OBJECTPOINT, 162), /* Callback function for opening socket (instead of socket(2)). Optionally, callback is able change the address or refuse to connect returning CURL_SOCKET_BAD. The callback should have type curl_opensocket_callback */ CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163), CINIT(OPENSOCKETDATA, OBJECTPOINT, 164), /* POST volatile input fields. */ CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165), /* set transfer mode (;type=) when doing FTP via an HTTP proxy */ CINIT(PROXY_TRANSFER_MODE, LONG, 166), /* Callback function for seeking in the input stream */ CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167), CINIT(SEEKDATA, OBJECTPOINT, 168), /* CRL file */ CINIT(CRLFILE, OBJECTPOINT, 169), /* Issuer certificate */ CINIT(ISSUERCERT, OBJECTPOINT, 170), /* (IPv6) Address scope */ CINIT(ADDRESS_SCOPE, LONG, 171), /* Collect certificate chain info and allow it to get retrievable with CURLINFO_CERTINFO after the transfer is complete. (Unfortunately) only working with OpenSSL-powered builds. */ CINIT(CERTINFO, LONG, 172), /* "name" and "pwd" to use when fetching. */ CINIT(USERNAME, OBJECTPOINT, 173), CINIT(PASSWORD, OBJECTPOINT, 174), /* "name" and "pwd" to use with Proxy when fetching. */ CINIT(PROXYUSERNAME, OBJECTPOINT, 175), CINIT(PROXYPASSWORD, OBJECTPOINT, 176), /* Comma separated list of hostnames defining no-proxy zones. These should match both hostnames directly, and hostnames within a domain. For example, local.com will match local.com and www.local.com, but NOT notlocal.com or www.notlocal.com. For compatibility with other implementations of this, .local.com will be considered to be the same as local.com. A single * is the only valid wildcard, and effectively disables the use of proxy. */ CINIT(NOPROXY, OBJECTPOINT, 177), /* block size for TFTP transfers */ CINIT(TFTP_BLKSIZE, LONG, 178), /* Socks Service */ CINIT(SOCKS5_GSSAPI_SERVICE, OBJECTPOINT, 179), /* Socks Service */ CINIT(SOCKS5_GSSAPI_NEC, LONG, 180), /* set the bitmask for the protocols that are allowed to be used for the transfer, which thus helps the app which takes URLs from users or other external inputs and want to restrict what protocol(s) to deal with. Defaults to CURLPROTO_ALL. */ CINIT(PROTOCOLS, LONG, 181), /* set the bitmask for the protocols that libcurl is allowed to follow to, as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs to be set in both bitmasks to be allowed to get redirected to. Defaults to all protocols except FILE and SCP. */ CINIT(REDIR_PROTOCOLS, LONG, 182), /* set the SSH knownhost file name to use */ CINIT(SSH_KNOWNHOSTS, OBJECTPOINT, 183), /* set the SSH host key callback, must point to a curl_sshkeycallback function */ CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184), /* set the SSH host key callback custom pointer */ CINIT(SSH_KEYDATA, OBJECTPOINT, 185), /* set the SMTP mail originator */ CINIT(MAIL_FROM, OBJECTPOINT, 186), /* set the SMTP mail receiver(s) */ CINIT(MAIL_RCPT, OBJECTPOINT, 187), /* FTP: send PRET before PASV */ CINIT(FTP_USE_PRET, LONG, 188), /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ CINIT(RTSP_REQUEST, LONG, 189), /* The RTSP session identifier */ CINIT(RTSP_SESSION_ID, OBJECTPOINT, 190), /* The RTSP stream URI */ CINIT(RTSP_STREAM_URI, OBJECTPOINT, 191), /* The Transport: header to use in RTSP requests */ CINIT(RTSP_TRANSPORT, OBJECTPOINT, 192), /* Manually initialize the client RTSP CSeq for this handle */ CINIT(RTSP_CLIENT_CSEQ, LONG, 193), /* Manually initialize the server RTSP CSeq for this handle */ CINIT(RTSP_SERVER_CSEQ, LONG, 194), /* The stream to pass to INTERLEAVEFUNCTION. */ CINIT(INTERLEAVEDATA, OBJECTPOINT, 195), /* Let the application define a custom write method for RTP data */ CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196), /* Turn on wildcard matching */ CINIT(WILDCARDMATCH, LONG, 197), /* Directory matching callback called before downloading of an individual file (chunk) started */ CINIT(CHUNK_BGN_FUNC, FUNCTIONPOINT, 198), /* Directory matching callback called after the file (chunk) was downloaded, or skipped */ CINIT(CHUNK_END_FUNC, FUNCTIONPOINT, 199), /* Change match (fnmatch-like) callback for wildcard matching */ CINIT(FNMATCH_FUNC, FUNCTIONPOINT, 200), /* Let the application define custom chunk data pointer */ CINIT(CHUNK_DATA, OBJECTPOINT, 201), /* FNMATCH_FUNC user pointer */ CINIT(FNMATCH_DATA, OBJECTPOINT, 202), /* send linked-list of name:port:address sets */ CINIT(RESOLVE, OBJECTPOINT, 203), /* Set a username for authenticated TLS */ CINIT(TLSAUTH_USERNAME, OBJECTPOINT, 204), /* Set a password for authenticated TLS */ CINIT(TLSAUTH_PASSWORD, OBJECTPOINT, 205), /* Set authentication type for authenticated TLS */ CINIT(TLSAUTH_TYPE, OBJECTPOINT, 206), /* Set to 1 to enable the "TE:" header in HTTP requests to ask for compressed transfer-encoded responses. Set to 0 to disable the use of TE: in outgoing requests. The current default is 0, but it might change in a future libcurl release. libcurl will ask for the compressed methods it knows of, and if that isn't any, it will not ask for transfer-encoding at all even if this option is set to 1. */ CINIT(TRANSFER_ENCODING, LONG, 207), /* Callback function for closing socket (instead of close(2)). The callback should have type curl_closesocket_callback */ CINIT(CLOSESOCKETFUNCTION, FUNCTIONPOINT, 208), CINIT(CLOSESOCKETDATA, OBJECTPOINT, 209), /* allow GSSAPI credential delegation */ CINIT(GSSAPI_DELEGATION, LONG, 210), CURLOPT_LASTENTRY /* the last unused */ }; enum CURLcode { CURLE_OK = 0, CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ CURLE_FAILED_INIT, /* 2 */ CURLE_URL_MALFORMAT, /* 3 */ CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for 7.17.0, reused in April 2011 for 7.21.5] */ CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ CURLE_COULDNT_RESOLVE_HOST, /* 6 */ CURLE_COULDNT_CONNECT, /* 7 */ CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */ CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server due to lack of access - when login fails this is not returned. */ CURLE_OBSOLETE10, /* 10 - NOT USED */ CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ CURLE_OBSOLETE12, /* 12 - NOT USED */ CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ CURLE_FTP_CANT_GET_HOST, /* 15 */ CURLE_OBSOLETE16, /* 16 - NOT USED */ CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ CURLE_PARTIAL_FILE, /* 18 */ CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ CURLE_OBSOLETE20, /* 20 - NOT USED */ CURLE_QUOTE_ERROR, /* 21 - quote command failure */ CURLE_HTTP_RETURNED_ERROR, /* 22 */ CURLE_WRITE_ERROR, /* 23 */ CURLE_OBSOLETE24, /* 24 - NOT USED */ CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ CURLE_OUT_OF_MEMORY, /* 27 */ /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error instead of a memory allocation error if CURL_DOES_CONVERSIONS is defined */ CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ CURLE_OBSOLETE29, /* 29 - NOT USED */ CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ CURLE_OBSOLETE32, /* 32 - NOT USED */ CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ CURLE_HTTP_POST_ERROR, /* 34 */ CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ CURLE_FILE_COULDNT_READ_FILE, /* 37 */ CURLE_LDAP_CANNOT_BIND, /* 38 */ CURLE_LDAP_SEARCH_FAILED, /* 39 */ CURLE_OBSOLETE40, /* 40 - NOT USED */ CURLE_FUNCTION_NOT_FOUND, /* 41 */ CURLE_ABORTED_BY_CALLBACK, /* 42 */ CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ CURLE_OBSOLETE44, /* 44 - NOT USED */ CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ CURLE_OBSOLETE46, /* 46 - NOT USED */ CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */ CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */ CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */ CURLE_OBSOLETE50, /* 50 - NOT USED */ CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint wasn't verified fine */ CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as default */ CURLE_SEND_ERROR, /* 55 - failed sending network data */ CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ CURLE_OBSOLETE57, /* 57 - NOT IN USE */ CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */ CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */ CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind that failed */ CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not accepted and we failed to login */ CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ CURLE_TFTP_PERM, /* 69 - permission problem on server */ CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ CURLE_CONV_FAILED, /* 75 - conversion failed */ CURLE_CONV_REQD, /* 76 - caller must register conversion callbacks using curl_easy_setopt options CURLOPT_CONV_FROM_NETWORK_FUNCTION, CURLOPT_CONV_TO_NETWORK_FUNCTION, and CURLOPT_CONV_FROM_UTF8_FUNCTION */ CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing or wrong format */ CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ CURLE_SSH, /* 79 - error from the SSH layer, somewhat generic so the error message will be of interest when this has happened */ CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL connection */ CURLE_AGAIN, /* 81 - socket is not ready for send/recv, wait till it's ready and try again (Added in 7.18.2) */ CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or wrong format (Added in 7.19.0) */ CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in 7.19.0) */ CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */ CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */ CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */ CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */ CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */ CURL_LAST /* never use! */ }; /* compatibility with older names */ #define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING /* The following were added in 7.21.5, April 2011 */ #define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION enum curl_TimeCond { CURL_TIMECOND_NONE, CURL_TIMECOND_IFMODSINCE, CURL_TIMECOND_IFUNMODSINCE, CURL_TIMECOND_LASTMOD, CURL_TIMECOND_LAST }; /* These enums are for use with the CURLOPT_NETRC option. */ enum CURL_NETRC_OPTION { CURL_NETRC_IGNORED, /* The .netrc will never be read. * This is the default. */ CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred * to one in the .netrc. */ CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. * Unless one is set programmatically, the .netrc * will be queried. */ CURL_NETRC_LAST }; enum curl_closepolicy { CURLCLOSEPOLICY_NONE, /* first, never use this */ CURLCLOSEPOLICY_OLDEST, CURLCLOSEPOLICY_LEAST_RECENTLY, // CURLCLOSEPOLICY_LEAST_RECENTLY_USED CURLCLOSEPOLICY_LEAST_TRAFFIC, CURLCLOSEPOLICY_SLOWEST, CURLCLOSEPOLICY_CALLBACK, CURLCLOSEPOLICY_LAST /* last, never use this */ }; enum { CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd like the library to choose the best possible for us! */ CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ }; #define CURLAUTH_NONE 0 /* nothing */ #define CURLAUTH_BASIC (1<<0) /* Basic (default) */ #define CURLAUTH_DIGEST (1<<1) /* Digest */ #define CURLAUTH_GSSNEGOTIATE (1<<2) /* GSS-Negotiate */ #define CURLAUTH_NTLM (1<<3) /* NTLM */ #define CURLAUTH_DIGEST_IE (1<<4) /* Digest with IE flavour */ #define CURLAUTH_NTLM_WB (1<<5) /* NTLM delegating to winbind helper */ #define CURLAUTH_ONLY (1<<31) /* used together with a single other type to force no auth or just that single type */ #define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) /* all fine types set */ #define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) /* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ enum curl_ftpcreatedir { CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD again if MKD succeeded, for SFTP this does similar magic */ CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD again even if MKD failed! */ CURLFTP_CREATE_DIR_LAST /* not an option, never use */ }; /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host name resolves addresses using more than one IP protocol version, this option might be handy to force libcurl to use a specific IP version. */ #define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP versions that your system allows */ #define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */ #define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */ /* parameter for the CURLOPT_USE_SSL option */ enum curl_usessl { CURLUSESSL_NONE, /* do not attempt to use SSL */ CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ CURLUSESSL_ALL, /* SSL for all communication or fail */ CURLUSESSL_LAST /* not an option, never use */ }; enum { CURL_SSLVERSION_DEFAULT, CURL_SSLVERSION_TLSv1, CURL_SSLVERSION_SSLv2, CURL_SSLVERSION_SSLv3, CURL_SSLVERSION_LAST /* never use, keep last */ }; /* parameter for the CURLOPT_FTPSSLAUTH option */ enum curl_ftpauth { CURLFTPAUTH_DEFAULT, /* let libcurl decide */ CURLFTPAUTH_SSL, /* use "AUTH SSL" */ CURLFTPAUTH_TLS, /* use "AUTH TLS" */ CURLFTPAUTH_LAST /* not an option, never use */ }; enum curl_ftpfile { FTPFILE_MULTICWD = 1, /* as defined by RFC1738 */ FTPFILE_NOCWD = 2, /* use SIZE / RETR / STOR on the full path */ FTPFILE_SINGLECWD = 3 /* make one CWD, then SIZE / RETR / STOR on the file */ }; #define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ #define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ #define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ #define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ #define CURLSSH_AUTH_HOST (1<<2) /* host key files */ #define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ #define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY #define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */ #define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */ #define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */ /* parameter for the CURLOPT_FTP_SSL_CCC option */ enum curl_ftpccc { CURLFTPSSL_CCC_NONE, /* do not send CCC */ CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ CURLFTPSSL_CCC_LAST /* not an option, never use */ }; /* symbols to use with CURLOPT_POSTREDIR. CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL */ #define CURL_REDIR_GET_ALL 0 #define CURL_REDIR_POST_301 1 #define CURL_REDIR_POST_302 2 #define CURL_REDIR_POST_ALL (CURL_REDIR_POST_301|CURL_REDIR_POST_302) /* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ #define CURLPROTO_HTTP (1<<0) #define CURLPROTO_HTTPS (1<<1) #define CURLPROTO_FTP (1<<2) #define CURLPROTO_FTPS (1<<3) #define CURLPROTO_SCP (1<<4) #define CURLPROTO_SFTP (1<<5) #define CURLPROTO_TELNET (1<<6) #define CURLPROTO_LDAP (1<<7) #define CURLPROTO_LDAPS (1<<8) #define CURLPROTO_DICT (1<<9) #define CURLPROTO_FILE (1<<10) #define CURLPROTO_TFTP (1<<11) #define CURLPROTO_IMAP (1<<12) #define CURLPROTO_IMAPS (1<<13) #define CURLPROTO_POP3 (1<<14) #define CURLPROTO_POP3S (1<<15) #define CURLPROTO_SMTP (1<<16) #define CURLPROTO_SMTPS (1<<17) #define CURLPROTO_RTSP (1<<18) #define CURLPROTO_RTMP (1<<19) #define CURLPROTO_RTMPT (1<<20) #define CURLPROTO_RTMPE (1<<21) #define CURLPROTO_RTMPTE (1<<22) #define CURLPROTO_RTMPS (1<<23) #define CURLPROTO_RTMPTS (1<<24) #define CURLPROTO_GOPHER (1<<25) #define CURLPROTO_ALL (~0) /* enable everything */ /* * Public API enums for RTSP requests */ enum { CURL_RTSPREQ_NONE, /* first in list */ CURL_RTSPREQ_OPTIONS, CURL_RTSPREQ_DESCRIBE, CURL_RTSPREQ_ANNOUNCE, CURL_RTSPREQ_SETUP, CURL_RTSPREQ_PLAY, CURL_RTSPREQ_PAUSE, CURL_RTSPREQ_TEARDOWN, CURL_RTSPREQ_GET_PARAMETER, CURL_RTSPREQ_SET_PARAMETER, CURL_RTSPREQ_RECORD, CURL_RTSPREQ_RECEIVE, CURL_RTSPREQ_LAST /* last in list */ }; #define CURLINFO_STRING 0x100000 #define CURLINFO_LONG 0x200000 #define CURLINFO_DOUBLE 0x300000 #define CURLINFO_SLIST 0x400000 #define CURLINFO_MASK 0x0fffff #define CURLINFO_TYPEMASK 0xf00000 enum CURLINFO { CURLINFO_NONE, /* first, never use this */ CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, CURLINFO_FILETIME = CURLINFO_LONG + 14, CURLINFO_CONTENT_LEN_DOWNLOAD = CURLINFO_DOUBLE + 15, CURLINFO_CONTENT_LEN_UPLOAD = CURLINFO_DOUBLE + 16, CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, CURLINFO_PRIVATE = CURLINFO_STRING + 21, CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, CURLINFO_CERTINFO = CURLINFO_SLIST + 34, CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36, CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37, CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38, CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39, CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40, CURLINFO_LOCAL_IP = CURLINFO_STRING + 41, CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42, /* Fill in new entries below here! */ CURLINFO_LASTONE = 42 }; enum curl_proxytype { CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use CONNECT HTTP/1.1 */ CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT HTTP/1.0 */ CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already in 7.10 */ CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the host name rather than the IP address. added in 7.18.0 */ }; enum CURLformoption { CURLFORM_NOTHING, /********* the first one is unused ************/ /* */ CURLFORM_COPYNAME, // char CURLFORM_PTRNAME, // not support CURLFORM_NAMELENGTH, // long CURLFORM_COPYCONTENTS, // char CURLFORM_PTRCONTENTS, // not support CURLFORM_CONTENTSLENGTH, // long CURLFORM_FILECONTENT, // char CURLFORM_ARRAY, // not support CURLFORM_OBSOLETE, CURLFORM_FILE, // char CURLFORM_BUFFER, // not support CURLFORM_BUFFERPTR, // not support CURLFORM_BUFFERLENGTH, // not support CURLFORM_CONTENTTYPE, // char CURLFORM_CONTENTHEADER, // curl_slist CURLFORM_FILENAME, // char CURLFORM_END, // !! CURLFORM_OBSOLETE2, CURLFORM_STREAM, // not support CURLFORM_LASTENTRY /* the last unused */ }; enum CURLFORMcode { CURL_FORMADD_OK, /* first, no error */ CURL_FORMADD_MEMORY, CURL_FORMADD_OPTION_TWICE, CURL_FORMADD_NULL, CURL_FORMADD_UNKNOWN_OPTION, CURL_FORMADD_INCOMPLETE, CURL_FORMADD_ILLEGAL_ARRAY, CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ CURL_FORMADD_LAST /* last */ };